POLYCRYSTALLINE DIAMOND COMPOSITES (PDC)
① Standard Non-Plain PDC (With Claws)
These types PDC have a higher content of diamond than standard products. The strength bonded between PDC layer and carbide also much higher than before. Without any doubt, these types would have a higher wear resistance and long life.
Item系列 | Diameter (mm)直径 | Height (mm)高度 |
0803 | 8.00/8.23 | 3.53 |
0908 | 9.00 | 8.00 |
1308 | 13.44 | 8.00 |
1313 | 13.44 | 13.20 |
1608 | 15.88 | 8.00 |
1613 | 15.88 | 13.20 |
1616 | 15.88 | 16.00 |
1908 | 19.05 | 8.00 |
1913 | 19.05 | 13.20 |
1916 | 19.05 | 16.00 |
1919 | 19.05 | 19.00 |
② Simplified PDC
Simplified PDC is manufactured by different technology. It has a high efficiency but low cost, and suitable for specific applications, such as geological drilling, coal mining etc.
Item | Specification |
Standard cutters
| 1304 |
1305 | |
1308 | |
Domed hemispherical back cutters
|
|
Cutters with big chamfer
|
|
POLYCRYSTALLINE DIAMOND COMPOSITES (PDC)
① Standard Non-Plain PDC (With Claws)
These types PDC have a higher content of diamond than standard products. The strength bonded between PDC layer and carbide also much higher than before. Without any doubt, these types would have a higher wear resistance and long life.
Item系列 | Diameter (mm)直径 | Height (mm)高度 |
0803 | 8.00/8.23 | 3.53 |
0908 | 9.00 | 8.00 |
1308 | 13.44 | 8.00 |
1313 | 13.44 | 13.20 |
1608 | 15.88 | 8.00 |
1613 | 15.88 | 13.20 |
1616 | 15.88 | 16.00 |
1908 | 19.05 | 8.00 |
1913 | 19.05 | 13.20 |
1916 | 19.05 | 16.00 |
1919 | 19.05 | 19.00 |
② Simplified PDC
Simplified PDC is manufactured by different technology. It has a high efficiency but low cost, and suitable for specific applications, such as geological drilling, coal mining etc.
Item | Specification |
Standard cutters
| 1304 |
1305 | |
1308 | |
Domed hemispherical back cutters
|
|
Cutters with big chamfer
|
|
